Product Snapshots
(Issue 3, 2005)
Screwless
terminal blocks
added to connection systems line
__________________________________________________________________
Click
here for more information on the new Screwless terminal blocks
for connection systems
Cumming, GA---January 15, 2005 --- AutomationDirect
now offers screwless terminal blocks, including feed-through,
double-level, one-to-two connection, two-to-two connection,
and knife blade disconnect models, along with a line of accessories.
Screwless clamp technology offers many benefits not found in
traditional terminal blocks. Without screws, connections can
typically be made in half the time. Wiring occurs on the top
of the terminal blocks, making it easier for installers to fully
insert wires into the spring clamps. Screwless terminals also
offer vibration-proof connections and are maintenance-free,
since screw clamps apply constant tension to the wires.
Feed-through terminal blocks connect two wires together and
are available in sizes suitable for up to 8 AWG. They are sold
in packages of 50 in blue or gray.
Double-level terminal blocks offer twice the wiring density
of feed-through blocks and are available in packages of 25 in
gray or blue. Cross-connected, LED and diode style double-level
models are also available, in packages of 10.
One connection-to-two connection and two connection-to-two connection
terminal blocks allow multiple wires to be tied together by
way of multiple spring clamps. They are available in packages
of 25. LED and diode styles are also available, in packages
of 10.
Knife blade disconnect terminal blocks allow fast circuit disconnection
without rewiring by using a pivoting, insulated "knife
blade". They are available in gray in packages of 25. Ground
terminal blocks are used to mechanically and electrically connect
wires to a DIN rail by means of a conducting clamp foot, allowing
the DIN rail to function as a ground bus bar. Ground blocks
are molded in green and yellow to meet international standards.
They are available in packages of 10.
A line of accessories, including DIN rail, end brackets and
covers, angled support brackets, jumper bars and marking accessories
rounds out the offering. Prices for the screwless terminals
start at $0.48 per piece (sold in quantity).
100
Mb Ethernet I/O and
communication modules for
DirectLOGIC PLCs
__________________________________________________________________
Click
here for more information on the new 100 MB Ethernet I/O and
communication modules for DirectLOGIC PLCs
Cumming,
GA---January 15, 2005 ---
AutomationDirect now offers a 100 Mb Ethernet I/O base controller
module and Ethernet communication module for the DirectLOGIC
line of PLCs. Both modules are priced at $299.
The H2-EBC100 Ethernet Base Controller module provides a low-cost,
high-performance Ethernet link between DL205 I/O and a PC-based
control system or WinPLC/DL205/ DL405 CPUs using AutomationDirect's
Ethernet Remote Master module for remote I/O. The module can
also be used to connect DL205 I/O to a MODBUS TCP/IP client
(master). The module is compatible with TCP/IP, IPX and MODBUS
TCP/IP protocols for flexible PC communications. EBC modules
support a virtually unlimited number of I/O points, deterministic
I/O updates on dedicated networks, and fast I/O updates (<1ms
per base). An on-board serial port is available for connection
to operator panels, ASCII In/Out, etc.
PC-based control software is available that is ready to use
with the H2-EBC100 module. These packages are equipped with
compatible I/O device drivers, program development tools, and
run-time environments.
The H2-ECOM100 supports the industry standard MODBUS TCP/IP
Client/Server protocol in addition to standard IP and IPX protocols.
This allows a DL205 PLC with an
H2-ECOM100 module to serve as a client (master) or as a server
(slave) on a MODBUS TCP/IP Ethernet network. The H2-ECOM100
can actively issue MODBUS commands to other nodes or devices
on the MODBUS TCP/IP network or simply respond to connected
MODBUS TCP/IP clients.
Free NetEdit3 software ships with the H2-ECOM100 User Manual
and is used to configure the modules for a network. Flexible
addressing allows the choice of protocols and identifying methods.
Each module can be assigned a number, a name or both. An
IP address is not necessary, but can be used if needed for the
network. NetEdit3 uses two protocols for PC-to-PLC communications.
8-channel
sink/source module available
for Terminator I/O
__________________________________________________________________
Click
here for more information on the new 8-channel sink/source modules
available for Terminator I/O
Cumming,
GA---January 15, 2005 ---
The T1H-08TDS, an 8-channel, isolated 2 amp DC output module,
is now available for AutomationDirect's Terminator field I/O,
a practical network I/O solution for remote I/O, PC-based control,
and distributed control applications. The module features electric
over current protection and eight fully isolated channels and
sink or sourcing wiring options. The module has a voltage range
of 5-36 VDC. It is priced at $149.
New
Think and Do Live!
WinPLC programming pack
__________________________________________________________________
Click
here for more information on the new Think and Do Live! WinPLC
programming pack
Cumming, GA---January 15, 2005 ---
A
Think & Do Live! software programming pack (V5.51) for AutomationDirect's
DL205 WinPLC is now available. The package offers WinPLC users
a low-cost development environment with the same control and
connectivity features as the standard Think & Do Live! package
for applications that do not require separate PC HMI screens.
The Think & Do Live! WinPLC programming pack features flowchart
logic, simple I/O configution, WinPLC ModbusTCP Ethernet port
and Modbus RTU serial port drivers, and OPC Client and server.
The package is priced at $695 and includes one development system
license on CD-ROM, a Certificate of Integrity, and user manual.
Molded
case circuit breakers offer
circuit protection and save panel space
__________________________________________________________________
Click
here for more information on the new Molded case circuit breakers
Cumming,
GA---January 15, 2005 ---
AutomationDirect has introduced a line of Molded Case Circuit
Breakers (MCCBs) that offers UL489 listed performance for branch
circuit overcurrent protection and disconnecting means. The
circuit breakers’ small size saves panel space, compared
to standard breakers or comparable fusible devices. The MCCBs
use patented contact conductor designs featuring high-speed
“blow-open” action that results in superior performance
when high level fault currents produce extraordinary electromechanical
forces. They also feature advanced arc extinguishing technology,
and a toggle handle that provides three positions (on/off/tripped)
along with visual indicators. Prices for the new line start
at $139. A line of accessories is also available for the MCCBs.
__________________________________________________________________
Links to the current issue of Automation Notebook are found below.
Click the Back Issues link to visit the archives.
